WRND Labs AX5042 OEM Carrier Module

The WRND LABS AX5042-C868 is a carrier module which provides a simple interface to the AX5042.

• AX5042 on PCB
• RF Impedance : 50 ohms
• Voltage : 2.3 - 2.8 V
• RF Power : 12mW
• Sensitivity = -122 dBm
• Supply current = 36mA Tx mode
• Supply current = 21mA in RX mode
• Powerdown current = 0.5 micro Amp
• Transmitted data rate: up to 600kbps
• Set up for 868 Mhz operation

Polygon Configurable OEM Radio Module

The Polygon RF-OEM-868 is one half of a PCB mounted all-in-one Radio modem solution.

• nRF905-C868 with Radio Modem IC
• Programmable via Serial Interface
• RF Power : 10mW
• Voltage : 3.3V
• Supply current = 36mA in TX mode
• Data rate (over air): 200kbps
• Data rate (effective) : 14kbps
• Set up for 868 Mhz operation

Polygon nRF905 OEM Carrier Module

The Polygon nRF905-C868 is a carrier module which provides a simple interface to the Nordic nRF905.

• nRF905 on PCB
• RF Impedance : 50 ohms
• DIP-24 compatible footprint
• Voltage : 1-9-3.6V
• Supply current = 30mA in TX mode
• Supply current = 12.5mA in RX mode
• Transmitted data rate: 100kbps
• Set up for 868 Mhz operation

Radiometrix WBFM Transceiver - 64 Kbps

The Radiometrix BiM3A is a half-duplex radio transceiver for use in high-speed bi-directional data transfer.

• Frequency: 869.85 MHz
• XTAL controlled PLL for TX and RX
• Double conversion FM superhet receiver
• RF Sensitivity: -100 dBm / 1ppm BER
• Size : 33 x 23 x 4 mm
• Supply : 2.7-6V, 8mA TX, 11mA RX
• Feauture rich : RSSI
• Data Rate: 64 Kbps  

AeroComm Data Transceiver - 5mW Fixed

The fully certified 868Mhz tranceiver delivers 5mW of output power.

• Fully ETSI approved
• (1) A/D input line; (1) D/A output line
• Small Form Factor : 48 x 42 x 5mm
• High 868MHz data rate: 115.2 Kbps
• 3V or 5V compatible
• RF Output Connector : MMCX Female
• Optional Samtec 20-pin Connector 

AeroComm Data Transceiver - 250mW Fixed

The AC4868 is a fully certified 868 MHz transceiver delivering 250mW of output power

• Fully ETSI and CE approved
• Seamless cable-to-transceiver replacement
• Small Form Factor : 48 x 42 x 5mm
• High 868MHz data rate: 57.6 Kbps
• Industrial Temp range: -40/+80°C
• RF Output Connector : MMCX Female
• Optional Samtec 20-pin Connector

AeroComm RS-232 Adapter for AC4xxx

These adapter boards convert the Aerocomm Module's 5V Serial TTL interface into a RS-232 interface.

• RS232 DB9 for connection to PC
• 5V TTL serial connection
• LED indicators for status & comms
• Switches for easy configuration & reset
• 868 MHz Modules AC4486/AC4868 
• 915 MHz Modules AC4490/AC4790
• 2.4 GHz Modules AC4424
• Aerocomm Transceiver Modules sold seperately

AeroComm AC4868-250M System Design Kit

A complete development environment for engineers to implement radio designs quickly.

• Two AC4868-250M Modules
• Two RS-232 serial adapter boards
• Two AC/DC power adapters
• Two 868 MHz dipole antennas
• Aerocomm software utilities
• Factory Engineering Support