u-blox Programmable GPS with SuperSense®

The LEA-4H is a Programmable GPS module that combines configurable Flash EPROM with high sensitivity.

• 16 Channel Antaris 4 positioning engine
• SuperSense Indoor GPS, -158dBm
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 4 Hz position update rate
• 1 USB and 1 UART ports
• Industrial temp range: -40/+85°C
• Supports passive and active antennas

u-blox Antaris® 4 GPS Evaluation Kit

The ANTARIS 4 Evaluation Kit (AEK-4P) enables instant evaluation of ANTARIS 4 GPS modules and chipsets performance

• LEA-4P Module Inside
• Power Supply & Data Link in one
• USB 1.1 Device/USB V2.0 compatible 
• Active GPS Antenna  
• u-center GPS Evaluation Software
• Comprehensive documentation package

u-blox Antaris® 4 SuperSense® GPS Evaluation Kit

The ANTARIS 4 SuperSense Evaluation Kit (AEK-4H) enables instant evaluation of weak Signal GPS modules and chipsets performance.

• LEA-4H Module Inside
• SuperSense Indoor GPS, -158dBm
• Power Supply & Data Link in one
• USB 1.1 Device/USB V2.0 compatible 
• Active GPS Antenna  
• u-center GPS Evaluation Software
• Comprehensive documentation package

u-blox Low Cost ROM-based GPS Module

The LEA-4A is a cost-optimized GPS module (No Flash EPROM) suitable for Automotive applications.

• 16 Channel Antaris 4 positioning engine
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 4 Hz position update rate   
• 1 USB and 2 UART ports
• Industrial temp range: -40/+85°C
• Supports passive and active antennas

u-blox ROM-based GPS with SuperSense®

The NEO-4S module combines high sensitivity into an ultra-miniature package.

• 16 Channel Antaris 4 positioning engine
• SuperSense Indoor GPS, -158dBm
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 4 Hz position update rate
• 1 USB and 2 UART ports
• Supports passive and active antennas
• Industrial temp range: -40/+85°C
• Size : 12.2 x 16 x 2.8mm 

u-blox ROM-based GPS with SuperSense®

The LEA-4S module combines high sensitivity into a miniature package.

• 16 Channel Antaris 4 positioning engine
• SuperSense Indoor GPS, -158dBm
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 4 Hz position update rate 
• 1 USB and 2 UART ports
• Industrial temp range: -40/+85°C
• Supports passive and active antennas

u-blox GPS Module with Precision Timing

The LEA-4T is a programmable GPS module supporting precision GPS timing and raw measurement data.

• 16 Channel Antaris 4 positioning engine
• SuperSense Indoor GPS, -158dBm
• Supports Assisted GPS via AssistNow
• 15ns timing accuracy
• 10 Hz raw measurement data rate
• Supports DGPS, WAAS, EGNOS, MSAS
• 1 USB and 1 UART ports
• Industrial temp range: -40/+85°C

u-blox Low Cost ROM-based GPS Module

The TIM-4A is a cost-optimized GPS module (No Flash EPROM) suitable for Automotive applications.

• 16 Channel Antaris 4 positioning engine
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 4 Hz position update rate   
• 2 UART ports
• Industrial temp range: -40/+85°C
• Supports passive and active antennas

u-blox Programmable GPS Receiver Module

The TIM-4P is a Programmable GPS module that includes configurable Flash EPROM.

• 16 Channel Antaris 4 positioning engine
• Supports Assisted GPS via AssistNow
• Ultra low power comsumption
• 4 Hz position update rate
• 2 UART ports
• Industrial temp range: -40/+85°C
• Supports passive and active antennas

u-blox 5 PRO Series - Programmable GPS with Flash

The LEA-5H is a Programmable GPS module that combines configurable Flash EPROM with high sensitivity and KickStart weak signal acquisition technology.

• 50 Channel positioning engine
• Over 1 million correlators
• Under 1 sec Time-to-First-Fix (Aided)
• SuperSense Indoor GPS, -160dBm
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 4 Hz position update rate
• Industrial temp range: -40/+85°C
• EVK-5H Evaluation Kit available

u-blox 5 Evaluation Kit with KickStart

The u-blox 5 Evaluation Kit (EVK-5H) makes evaluating the high performance of the u-blox 5 GPS and GALILEO positioning engine simple.

• u-blox 5 Kickstart and SuperSense^® Technology
• SuperSense Indoor GPS, -160dBm
• Power Supply & Data Link via USB
• USB 1.1 Device/USB V2.0 compatible
• Active GPS Antenna with 5m cable
• u-center GPS Evaluation Software
• Comprehensive documentation package

u-blox 5 PRO Series - ROM-based GPS Module with KickStart

The LEA-5S is a stand-alone, compact GPS receiver module featuring u-blox' KickStart weak signal acquisition technology.

• 50 Channel positioning engine
• Over 1 million correlators
• Under 1 sec Time-to-First-Fix (Aided)
• SuperSense Indoor GPS, -160dBm
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 4 Hz position update rate
• Industrial temp range: -40/+85°C
• EVK-5H Evaluation Kit available

u-blox 5 LITE Series - NEO ROM-based GPS Module with KickStart

The NEO-5Q is a high performance GPS receiver module featuring u-blox' KickStart weak signal acquisition technology.

• 50 Channel positioning engine
• Over 1 million correlators
• Under 1 sec Time-to-First-Fix (Aided)
• SuperSense Indoor GPS, -160dBm
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 4 Hz position update rate
• Industrial temp range: -40/+85°C
• EVK-5H Evaluation Kit available

u-blox 5 LITE Series - NEO ROM-based GPS Module

The NEO-5M is a highly cost-effective stand-alone GPS receiver module, which offers numerous connectivity options in a miniature 16 x 12.2 x 2.4 mm package.

• 50 Channel positioning engine
• Over 1 million correlators
• Under 1 sec Time-to-First-Fix (Aided)
• SuperSense Indoor GPS, -160dBm
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 4 Hz position update rate
• Industrial temp range: -40/+85°C
• EVK-5P Evaluation Kit available

u-blox 5 LITE Series - LEA ROM-based GPS Module with KickStart

The LEA-5Q is a high performance GPS receiver module featuring u-blox' KickStart weak signal acquisition technology.

• 50 Channel positioning engine
• Over 1 million correlators
• Under 1 sec Time-to-First-Fix (Aided)
• SuperSense Indoor GPS, -160dBm
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 4 Hz position update rate
• Industrial temp range: -40/+85°C
• EVK-5H Evaluation Kit available

u-blox 5 PRO Series - ROM-based GPS Module

The LEA-5A is a stand-alone, compact GPS receiver module.

• 50 Channel positioning engine
• Over 1 million correlators
• Under 1 sec Time-to-First-Fix (Aided)
• SuperSense Indoor GPS, -160dBm
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 4 Hz position update rate
• Industrial temp range: -40/+85°C
• EVK-5P Evaluation Kit available

u-blox 5 PRO Series - Precision Timing GPS Module

u-blox 5 Evaluation Kit with SuperSense®

The u-blox 5 Evaluation Kit (EVK-5P) makes evaluating the high performance of the u-blox 5 GPS and GALILEO positioning engine simple.

• u-blox 5 SuperSense^® Technology
• SuperSense Indoor GPS, -160dBm
• Power Supply & Data Link via USB
• USB 1.1 Device/USB V2.0 compatible
• Active GPS Antenna with 5m cable
• u-center GPS Evaluation Software
• Comprehensive documentation package

u-blox 5 Precision Timing Evaluation Kit

The u-blox 5 Evaluation Kit (EVK-5T) makes evaluating the high performance of the u-blox 5 GPS and GALILEO positioning engine simple.

• u-blox LEA-5T module inside 
• SuperSense Indoor GPS, -160dBm
• Power Supply & Data Link via USB
• USB 1.1 Device/USB V2.0 compatible
• Active GPS Antenna with 5m cable
• u-center GPS Evaluation Software
• Comprehensive documentation package

u-blox 5 LITE Series - NEO ROM-based GPS Module (1.8V)

The NEO-5D is the world's first 1.8 Volt GPS module, which offers numerous connectivity options in a miniature 16 x 12.2 x 2.4 mm package.

• 50 Channel positioning engine
• Over 1 million correlators
• Under 1 sec Time-to-First-Fix (Aided)
• SuperSense Indoor GPS, -160dBm
• Supports Assisted GPS via AssistNow
• 1.8 volt voltage supply for lowest power consumption
• 4 Hz position update rate
• Industrial temp range: -40/+85°C
• EVK-5P Evaluation Kit available

u-blox 5 LITE Series - NEO ROM-based GPS Module with KickStart (1.8V)

The NEO-5G is a high performance GPS receiver module featuring u-blox' KickStart weak signal acquisition technology.

• 50 Channel positioning engine
• Over 1 million correlators
• Under 1 sec Time-to-First-Fix (Aided)
• SuperSense Indoor GPS, -160dBm
• Supports Assisted GPS via AssistNow
• 1.8 volt voltage supply for lowest power consumption
• 4 Hz position update rate
• Industrial temp range: -40/+85°C
• EVK-5H Evaluation Kit available

u-blox 5 - AMY ROM-based GPS Module (1.8V)

The u-blox AMY-5M is the world's smallest 1.8 Volt GPS module, which offers numerous connectivity options in a miniature 6.5 x 8 x 1.2 mm package.

• 50 Channel positioning engine
• Over 1 million correlators
• Under 1 sec Time-to-First-Fix (Aided)
• SuperSense Indoor GPS, -160dBm
• Supports Assisted GPS via AssistNow
• 1.8 volt voltage supply for lowest power consumption
• 4 Hz position update rate
• Industrial temp range: -40/+85°C
• EVK-5A Evaluation Kit available

u-blox 5 Evaluation Kit with SuperSense® for AMY

The u-blox 5 Evaluation Kit (EVK-5A) makes evaluating the high performance of the u-blox 5 GPS and GALILEO positioning engine simple.

• u-blox 5 SuperSense^® Technology
• SuperSense Indoor GPS, -160dBm
• Power Supply & Data Link via USB
• USB 1.1 Device/USB V2.0 compatible
• Active GPS Antenna with 5m cable
• u-center GPS Evaluation Software
• Comprehensive documentation package

u-blox LEON G100 Quad-Band GSM/GPRS Module

The u-blox LEON-G100 is a complete and cost efficient solution, bringing full feature Quad Band GSM/GPRS data and voice transmission technology in a compact form factor.

• Full feature quad-band GSM/GPRS module
• Embedded TCP/IP and UDP/IP stack
• Lowest Standby Currect : <1.6mA
• 2 analog audio interfaces
• Simple integration with u-blox GPS modules
• SMT mountable for automatic assembly
• Evaluation kit EVK-G25H available

u-blox LEON G200 Quad-Band GSM/GPRS Module

The u-blox LEON-G200 is a complete and cost efficient solution, bringing full feature Quad Band GSM/GPRS data and voice transmission technology in a compact form factor.

• Full feature quad-band GSM/GPRS module
• Embedded TCP/IP and UDP/IP stack
• Lowest Standby Currect : <1.6mA
• 2 analog audio interfaces
• Simple integration with u-blox GPS modules
• SMT mountable for automatic assembly
• Evaluation kit EVK-G25H available
• Battery Charging Circuit and FOTA

u-blox LEON Quad-Band Evaluation Kit

The u-blox EVK-G25H evaluation kit provides a simple, flexible and ready-to-use environment for evaluation the u-blox LEON series wireless modules. 

• Full feature LEON G200 GSM/GPRS module
• Biult-in LEAH-5H GPS module 
• Embedded TCP/IP and UDP/IP stack
• Supports voice and data 
• Access to GSM via USB Port
• Access to all LEON signals via 50-pin connector
• Powerful evaluation and configuration tools

u-blox C16-G25Q Telematics Reference Design

The C16-G25Q GSM/GPS reference design is a complete and integrated solution for telematics applications such as fleet management, asset tracking, road pricing, and security/surveillance.

• LEON-G200 GSM/GPRS voice and data Module
• NEO-5Q GPS Receiver Module
• Embedded Taoglas GSM and GPs Antennas
• 100% SMD solution including activated SIM chip

LEA-4H Reference Board and Ceramic Patch Antenna

Reference and test PCB for the u-Blox LEA-4H integrated with a ceramic patch antenna.

• LEA-4H mounted with driver IC's
• GPS Patch antenna on the other side 
• Fully populated and ready for evaluation
• USB and RS-232 Serial Interface
• Optional TTL interface via jumper
• Battery input for Real Time Clock
• View the Layout Drawing
• Dimensions: 45 x 45 x 6 mm

LEA-4S Reference Board and Ceramic Patch Antenna

Reference and test PCB for the u-Blox LEA-4S integrated with a ceramic patch antenna.

• LEA-4S mounted with driver IC's
• GPS Patch antenna on the other side 
• Fully populated and ready for evaluation
• USB and RS-232 Serial Interface
• Optional TTL interface via jumper
• Battery input for Real Time Clock
• View the Layout Drawing
• Dimensions: 45 x 45 x 6 mm

LEA-4P Reference Board and Ceramic Patch Antenna - TTL Only

Reference and test PCB for the u-Blox LEA-4P integrated with a ceramic patch antenna.

• LEA-4P mounted on one side of PCB
• GPS Patch antenna on the other side 
• Fully populated and ready for evaluation
• CMOS/TTL interface only
• Dimensions: 38 x 30 x 6 mm

u-blox 6 ROM-based GPS Module with KickStart

The NEO-6Q is a high performance GPS receiver module featuring u-blox' KickStart weak signal acquisition technology.

• 50 Channel u-blox 6 engine  
• Under 1 sec Time-to-First-Fix (Aided)
• SuperSense Indoor GPS, -160dBm
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 5 Hz navigation update rate
• SPI Interface 
• Industrial temp range: -40/+85°C
• 2.7 - 3.6V
• EVK-6H Evaluation Kit available
• 16.0 x 12.2 x 2.4 mm package

u-blox 6 Evaluation Kit with KickStart

The u-blox 6 Evaluation Kit (EVK-6H) makes evaluating the high performance of the u-blox 6 GPS and GALILEO positioning engine simple.

• u-blox 6 Kickstart and SuperSense^® Technology
• SuperSense Indoor GPS, -160dBm
• Power Supply & Data Link via USB
• USB 1.1 Device/USB V2.0 compatible
• Active GPS Antenna with 5m cable
• u-center GPS Evaluation Software
• Comprehensive documentation package

u-blox 6 ROM-based GPS Module

The LEA-6A is a high performance GPS receiver module.

• 50 Channel u-blox 6 engine  
• Under 1 sec Time-to-First-Fix (Aided)
• SuperSense Indoor GPS, -160dBm
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 5 Hz navigation update rate
• Industrial temp range: -40/+85°C
• 2.7 - 3.6V
• EVK-6P Evaluation Kit available
• 22.4 x 17 x 2.4 mm package

u-blox 6 FLASH-based GPS Module with Kickstart

The LEA-6H is a Programmable Flash-Based high performance GPS receiver module featuring u-blox' KickStart weak signal acquisition technology.

• 50 Channel u-blox 6 engine  
• Under 1 sec Time-to-First-Fix (Aided)
• SuperSense Indoor GPS, -160dBm
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 5 Hz navigation update rate
• Industrial temp range: -40/+85°C
• 2.7 - 3.6V
• EVK-6H Evaluation Kit available
• 22.4 x 17 x 2.4 mm package

u-blox 6 ROM-based GPS Module with KickStart

The LEA-6S is a high performance GPS receiver module featuring u-blox' KickStart weak signal acquisition technology.

• 50 Channel u-blox 6 engine  
• Under 1 sec Time-to-First-Fix (Aided)
• SuperSense Indoor GPS, -160dBm
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 5 Hz navigation update rate
• Industrial temp range: -40/+85°C
• 2.7 - 3.6V
• EVK-6H Evaluation Kit available
• 22.4 x 17 x 2.4 mm package

u-blox 6 Precision Timing GPS Module

The LEA-6T Precision Timing GPS module is ideally suited for applications that require highly accurate timing, high sensitivity, low power consumption and USB.

• 50 Channel u-blox 6 engine  
• Under 1 sec Time-to-First-Fix (Aided)
• SuperSense Indoor GPS, -160dBm
• Supports Assisted GPS via AssistNow
• Ultra low power consumption
• 5 Hz navigation update rate
• Industrial temp range: -40/+85°C
• 2.7 - 3.6V
• EVK-6T Evaluation Kit (in preparation)
• 22.4 x 17 x 2.4 mm package

u-blox 6 Evaluation Kit with SuperSense

The u-blox 6 Evaluation Kit (EVK-6P) makes evaluating the high performance of the u-blox 6 GPS and GALILEO positioning engine simple.

• u-blox 6 Kickstart and SuperSense^® Technology
• SuperSense Indoor GPS, -160dBm
• Power Supply & Data Link via USB
• USB 1.1 Device/USB V2.0 compatible
• Active GPS Antenna with 5m cable
• u-center GPS Evaluation Software
• Comprehensive documentation package