Tibbo BASIC-Programmable Industrial Controller

The Tibbo DS1000 a BASIC-programmable Industrial Controller.

• Based on the EM1000 module
• 88MHz purpose-buit CPU
• Onboard 512K flash disk
• Real-time clock with backup power
• Four High Speed external serial ports
• One 100BaseT Ethernet port
• Numerous status LEDs
• DIN rail mountable
• 9-25V power supply range
• Preloaded with a serial-over-IP application
• Upgradable to WLAN using GA1000

Tibbo BASIC-Programmable Ethernet Module

The EM1202 is a third-generation Tibbo Ethernet module built exclusively for use with Tibbo's rapid programming solution that includes Tibbo BASIC language, Tibbo IDE software, and TiOS operating system.

• Programmable with Tibbo BASIC
• 100BaseT Ethernet Port
• 512k flash disk, RTC and 32 GPIO's
• 4 high speed serial ports
• Extremely small - 17 x 19 x15 mm
• Firmware

Tibbo BASIC-Programmable Embedded Module.

The EM1000 is a third-generation Tibbo Ethernet module built exclusively for use with Tibbo's rapid programming solution that includes Tibbo BASIC language, Tibbo IDE software, and TiOS operating system. 

• 88MHz purpose-buit CPU
• Onboard 512K flash disk
• Real-time clock with backup power
• Four High Speed external serial ports
• One 100BaseT Ethernet port
• Numerous status LEDs
• Optional WA1000 WLAN module available
• Optional RJ1202 Ethernet connector available
• Firmware

Tibbo Serial to Ethernet LAN Embedded Module

The Tibbo EM203A+RJ203A Ethernet module features built-in Ethernet magnetics, RJ45 connector, and four status LED's.

• Fully integrated Serial-to-Ethernet module
• Power consumption: 230mA @ 5VDC
• 100BaseT Ethernet port
• TTL serial port (TX,RX,RTS,CTS,DTR,DSR)
• Four onboard status LED's
• Firmware is upgradeable
• CE and FCCeapproved
• Built-in RJ socket & Ethernet magnetics
• Firmware

Tibbo Wi-Fi SPI Add-on Module

Tibbo's GA1000 Wi-Fi add-on module expands scope of apps for BASIC-programmable modules by adding 802.11b/g comm's capability.

• GA1000 can be used with all T1000-based devices
• Implements 802.11b/g standard
• Chip antenna and RF connector onboard
• Power LED onboard
• Only 5 I/O interface lines
• Dimensions: 42 x 20 x 7mm

Tibbo BASIC-Programmable Embedded Module

The EM1000 is a third-generation Tibbo Ethernet module built exclusively for use with Tibbo's rapid programming solution that includes Tibbo BASIC language, Tibbo IDE software, and TiOS operating system. 

• 88MHz purpose-buit CPU
• Onboard 1025K flash disk
• Real-time clock with backup power
• Four High Speed external serial ports
• One 100BaseT Ethernet port
• Numerous status LEDs
• Optional WA1000 WLAN module available
• Optional RJ1202 Ethernet connector available
• Firmware

Tibbo EM1206EV Evaluation Board

The EM1206EV Evaluation Board offers a convenient way to test the EM1206 BASIC-programmable Ethernet module.

The board features the following components:

• The EM1206 and RJ203 modules.
• Connector for a wireless add-on module.
• Power jack and a switching power regulator.
• Multi-channel RS232 port with three RS232 outputs and four RS232 inputs.

Tibbo BASIC-Programmable Miniature Ethernet Module

The Tibbo EM1206+RJ203 is a miniature BASIC-programmable embedded module, features RJ45 connector.

• 10/100BaseT Ethernet port
• Flash disk and RTC onboard
• Four serial ports; up to 17 I/O lines
• Supports Wi-Fi, LCD, keypad, buzzer
• Mates with RJ203 jack/magnetics
• Very compact (33.2x18.1x5.5mm)
• Programmable with TIDE
• Firmware

Tibbo Serial to Ethernet LAN Device Server

The Tibbo DS1206 is a Serial to Ethernet LAN Device Server.

• 10/100BaseT Ethernet Port
• Compact (60x47x30mm)
• Up to 3.5 serial channels
• Superior upgrade to DS203/1202.
• Power input/output through RS232 port
• Free serial-over-IP Tibbo BASIC application available
• Firmware

Tibbo BASIC-Programmable Multi-Port Controllers

The Tibbo DS1002-SK is a BASIC-Programmable Multi-Port Controller.

• Universal RS232/422/485 ports
• Programmable selection of each port's mode
• Onboard 512K flash disk
• Real-time clock with backup power
• Four High Speed external serial ports
• One 100BaseT Ethernet port
• Numerous status LEDs
• DIN rail mountable
• Preloaded with a serial-over-IP application
• Configurable via the DS Manager or
• Aggregate Device Management System
• Upgradable to WLAN using GA1000
• Includes all accessories

Tibbo ANALOG I/O Controller

The Tibbo DS1004 is an Analog I/O Controller.

• 10/100BaseT Ethernet Port
• IP68-compliant, -30C to +80C range
• 4 D/A outputs (14 bits, voltage/current)
• 1 RS232/485 port
• Preloaded with an open-source application
• Configurable via the DS Manager  or
• Aggregate Device Management System
• Upgradable to WLAN using GA1000
• Includes all accessories

Tibbo Digital I/O Controller

The Tibbo DS1005 is a Digital I/O Controller. 

• 10/100BaseT Ethernet Port
• IP68-compliant, -30C to +80C range
• 8 digital isolated inputs
• 6 high-power (10A/30VDC) relays
• Preloaded with an open-source application
• Configurable via the DS Manager or
• Aggregate Device Management System
• Upgradable to WLAN using GA1000

Tibbo EM500 BASIC-Programmable Ethernet Module

The Tibbo EM500 is a miniature stand-alone
BASIC-programmable embedded module.

• 10/100BaseT Ethernet port
• One serial port, 8 I/O lines
• Works with a standard RJ45 jack
• Height and width of an RJ45 jack
• Dual-function LED control
• Firmware
• Size: 19 x 16 x 6.5 mm

 

Tibbo BASIC EM500-EV Evaluation System

The Tibbo EM500EV Evaluation System offers a convenient way of testing the EM500 BASIC-programmable Embedded module. The EM500EV consists of two boards:

• EM500EV-MB0 motherboard with EM500 module
• EM500EV-IB0 RS232 interface board
• Power Supply included

Tibbo BASIC-Programmable Evaluation Board - RS232

The Tibbo DS1206N-RS is a BASIC-programmable board designed for serial-over-IP and serial control applications. 

• 10/100BaseT Ethernet Port
• Up to 3.5 serial channels
• Superior upgrade to DS203/1202.
• Power input/output through RS232 port
• Free serial-over-IP Tibbo BASIC application available
• Firmware
• Compact Size: 52.6 x 38.0mm

Tibbo DS1100 BASIC-Programmable Controller

The Tibbo DS1100 is a compact BASIC-programmable controller targeting cost-sensitive serial-over-IP and serial control applications.

• 10/100BaseT Ethernet port
• Single-channel RS232 port (DB9)
• Power input through DB9
• Optional power-over-Ethernet
• DIN rail, wall mounting plates included
• Size: 90 x 48 x 25mm

Tibbo DS1101 BASIC-programmable Controller

The Tibbo DS1101 is a compact BASIC-programmable controller targeting cost-sensitive serial-over-IP and serial control applications.

• 10/100BaseT Ethernet port
• 3.5-channel RS232 port (DB9)
• Power input/output through DB9
• Optional 802.11b/g Wi-Fi interface
• Optional OLED display
• Optional power-over-Ethernet
• DIN rail, wall mounting plates included
• Size: 90 x 48 x 25mm

Tibbo DS1102 BASIC-Programmable Controller

The Tibbo DS1102 is a compact BASIC-programmable controller targeting cost-sensitive serial-over-IP and serial control applications.

• 10/100BaseT Ethernet port
• RS232, RS422, and RS485 modes
• 3 channels in the RS232 mode
• Optional 802.11b/g Wi-Fi interface
• Optional OLED display
• Optional power-over-Ethernet
• DIN rail, wall mounting plates included
• Size: 90 x 48 x 25mm